CS-3506 | TESLA MODEL 3

無懼車重,瞬息隨心,重現 Model 3 俐落轉向基因 Unfazed by the weight. Instant to respond. Restoring Model 3's razor-sharp cornering.

專為純電車款高負載與大扭力打造的前軸下控制臂,完美對位原廠幾何,重拾出廠時凌厲、安靜且扎實的精準路感。 A front lower control arm engineered for EV-class loads and instant torque — matching original geometry to restore the sharp, quiet, solid road feel Model 3 left the factory with.

BUSHING × 2 BALL JOINT LOWER CONTROL ARM · STRAIGHT
前軸下控制臂(直臂)結構示意Front lower control arm (straight) layout FIG. 01

什麼時候該檢查?When to inspect

Model 3 以強大純電扭力與低重心操控聞名,但受限於沉重電池包,懸吊部件須承受數倍動態應力,里程增加後前軸控制臂襯套容易因高負荷老化。The Model 3 is known for instant EV torque and a low center of gravity, but its heavy battery pack pushes suspension components through several times the dynamic stress of a combustion car — as mileage builds, the front control arm bushings age under that load.

起步或煞車拉扯感Tugging under acceleration or regen

起步加速或動能回收煞車(Regen)時,底盤傳出沉悶異音與拉扯感。A dull noise and tugging sensation through the chassis during launch or regenerative braking.

車頭不規律晃動Irregular front-end shimmy

過彎或行經不平路面時,車頭出現不規律晃動與異音。Uneven front-end movement and noise appear over corners or rough pavement.

核心技術優勢Core Technical Advantages

01 — 03

100% 精準直上對位100% precise direct fit

嚴格遵循原廠 OE 規格設計,完美相容原廠料號,讓專業保修技師能無縫直上、精準完工。Built strictly to OE specification and fully compatible with the original part numbers, letting professional technicians install it seamlessly with a precise fit.

對應原廠料號 Cross-reference OEM numbers 1044341-00-C1044341-00-D

專為純電高負載研發Engineered for EV-class loads

針對電動車高車重、強大瞬間扭力的特性優化,提供遠超一般傳統零件的抗扭曲與結構剛性,大幅提升過彎與加速時的穩定度。Optimized for the EV's high curb weight and instant torque, offering far greater anti-torsion and structural rigidity than conventional parts — for noticeably more stable cornering and acceleration.

優化高階複合靜音襯套Optimized composite silent bushings

Tesla 因為沒有引擎噪音,底盤異音會被放大得格外明顯。CS-3506 搭載高密度吸震襯套,能全面過濾路面碎震與囓合異音,捍衛純電座駕引以為傲的靜謐體驗。Without engine noise to mask it, chassis noise stands out far more in an EV. CS-3506 uses a high-density shock-absorbing bushing to filter out road vibration and mechanical noise, protecting the quiet cabin EV owners expect.

產品規格Product Specifications

共 1 件1 part
產品編號Part No. 適用車款Model 適用位置Fitment 對應原廠料號(部分)Cross-Reference OEM No. (Partial)
CS-3506 TESLA MODEL 3 前軸/下方/直臂Front Axle · Lower · Straight 1044341-00-C / 1044341-00-D

FAQ

Q&A
CS-3506 為 OEM 規格替代零件,非原廠零件,其幾何與料號皆對應原廠設計,可直上安裝,無需改裝。 CS-3506 is an OEM-spec aftermarket replacement part, not a genuine factory part — its geometry and part cross-references match the original design for direct, bolt-on installation.
當車輛在起步加速、動能回收煞車或過彎時出現沉悶異音、拉扯感或車頭不規律晃動,通常代表控制臂襯套已因高負荷老化磨損,建議檢查並更換。 Dull noise, a tugging sensation, or irregular front-end shimmy during acceleration, regen braking, or cornering typically signals bushing wear from high dynamic load, and inspection or replacement is recommended.
專為 TESLA MODEL 3 純電轎跑的前軸下控制臂(直臂)位置設計,因應純電車款的高車重與大扭力特性優化。 Designed specifically for the front axle lower (straight) control arm position on the TESLA MODEL 3, optimized for the EV's high curb weight and strong instant torque.

聯絡我們Contact Us

本系列產品已於 CTE 官方商城正式曝光,歡迎全球汽車保修連鎖、電動車專門修護廠、底盤零部件經銷商與車主洽詢採購。This product line is now live on the CTE official store. Global auto-repair chains, EV specialty shops, chassis parts distributors, and vehicle owners are welcome to inquire.

CTE

CTE 歐洲底盤技術專家,依循歐洲頂尖製程標準打造 OEM 規格底盤零組件。本頁產品為 OEM 規格替代零件,非原廠零件。CTE — European Chassis Technology Expert. OEM-spec chassis components built to top-tier European manufacturing standards. Products shown are aftermarket replacement parts, not genuine factory parts.

cteparts.tw